Home » Products » Grid Tie Inverter » WDL Wind Grid Tie Inverter

WDL Wind Grid Tie Inverter

WDL Wind Grid Tie Inverter

Our WDL wind grid tie inverter can be divided into two models, namely WDL series and WAL series, offering power from 250W to 2000W. The grid-tied wind inverter of WDL series is suitable for the DC output wind turbine. The high efficiency power inverter of WAL series can be connected to the AC output wind turbine directly. Both types have built-in dump load controller and built-in high wind protection function.

Specifications

Specifications
Model RB-250G-
WDL
RB-500G-
WDL
RB-600G-
WDL
RB-1000G-
WDL
RB-1500G-
WDL
RB-2000G-
WDL
Normal AC Output Power 225W 450W 540W 900W 1450W 1800W
Maximum AC Output Power 250W 500W 600W 1000W 1500W 2000W
AC Output Voltage Switch is at 230V position 190V-260V
Switch is at 115V position 90V-130V
AC Output Frequency 46Hz-65Hz
Total Harmonic Distortion (THD) <5%
Power Factor 0.99
DC Input Voltage 10.8V-30V 45V-90V
22V-60V (optional)
Peak Inverter Efficiency 92% (The consumption of the rectifier is not calculated.)
Standby Power Consumption <1.5W
Output Current Waveform Pure sine-wave
MPPT Function Yes
Over Current Protection Yes
Over Temperature Protection Yes
Reverse Polarity Protection Yes
Anti-islanding Protection Yes
Stacked Installation Yes
N.W. 1.7kg 3.5kg 3.5kg 5.0kg 4.6kg 5.5kg
G.W. 1.9kg 4.0kg 4.0kg 5.5kg 5.2kg 6.2kg
Dimensions 295×190×
100mm
332×265×
135mm
332×265×
135mm
405×275×
123mm
353×230×
92mm
353×230×
92mm

Features & Installation

Features
1) The WDL wind grid tie inverter is specially offered for DC output wind turbine.
2) It is designed with build-in dump load controller and built-in high wind protector.
3) Pure sine wave output
4) This power inverter has high frequency and high conversion rate.
5) Anti-islanding protection
6) Both input and output end are fully isolated to guarantee the electrical safety.
7) Installation in stack is available.

Installation
1) Firstly, connect the wind grid tie inverter to the DC output wind turbine. Battery is not required.
2) Secondly, connect the product to plug-and-play small home wind power generation system.

Other Products
  • WAL Wind Grid Tie InverterThe WAL wind grid tie inverter is designed in two models, WDL and WAL, to offer power from 250W to 2000W. The WDL high-safety power inverter is suitable for DC output wind turbine and the WAL grid-tied wind inverter can be directly connected to the AC output wind turbine.
  • MPPT Solar Charge ControllerSuperior to the conventional PWM controller, this TR MPPT solar charge controller increases the charge efficiency by 30% and potentially decreases the needed power of the solar panel.