Home » Products » Off-Grid Inverter » Power Inverter with Charger » RBPSW Power Inverter with Charger

RBPSW Power Inverter with Charger

RBPSW Power Inverter with Charger

The RBPSW power inverter with charger is a kind of UPS power inverter composed of inverter, battery charger, and transfer switch. It converts DC power into AC power. The inverter-charger combis will automatically provide power when AC power supply is interrupted unexpectedly. When AC power is available, the combined charger and inverter will recharge the house batteries. The battery can be set up for prior application. This backup power is quiet and safe for indoor use.

The RBPSW power inverter with charger is capable of providing standard household electricity for wide variety of electric equipment and appliance extensively used by commercial telecoms, mining industry, and industrial market, when electric utility power is not available.

Specifications

Specifications of Power Inverter with Charger
Model No. RBPSW-
1000W
RBPSW-
2000W
RBPSW-
3000W
RBPSW-
4000W
RBPSW-
5000W
RBPSW-
6000W
Rated Output Power (W) 1000 2000 3000 4000 5000 6000
Line Mode Specifications
Input Voltage Waveform Sinusoidal (Public utility or generator)
Nominal Input Voltage 230VAC (120VAC selectable) 230VAC
Low Line Disconnection 155VAC ±4%/96AVC ±4%
Low Line Re-connection 164VAC ±4%/100VAC ±4%
High Line Disconnection 272VAC ±4%/132VAC ±4%
High Line Re-connection 265VAC ±4%/127VAC ±4%
Max. AC Input Voltage 270Vrms/140Vrms
Nominal Input Frequency 50Hz/60Hz (Auto detection)
Low Line Frequency Re-connection 44+0.3Hz for 50Hz
Low Line Frequency Disconnection 40+0.3Hz for 50Hz
High Line Frequency Re-connection 75+0.3Hz for 50Hz
High Line Frequency Disconnection 80+0.3Hz for 50Hz
Output Voltage Waveform Same as input waveform
Overload Protection (SMPS load) Circuit breaker
Output Short Circuit Protection Circuit breaker
Efficiency (Line Mode) >95%
Transfer Switch Rating 30A
Transfer Time (AC to DC) 10ms (typical)
Transfer Time (DC to AC) 10ms (typical)
Pass-through without Battery Yes
Max. Bypass Overload Current 30A 40A
Inverse Mode Specifications
Output Voltage Waveform Pure Sine Wave
Power Factor 1
Nominal Output Voltage (V) 230VAC/120±10% 230VAC±10%
Nominal Output Frequency (Hz) 50/60Hz±0.3Hz
Auto Tracking Main Frequency (Hz) Yes (First main connection) 50Hz @48-54Hz; 60Hz @58-64Hz
Output Voltage Regulation ±10%rms
Nominal Efficiency >80%
Overload Protection (SMPS load) (110% < load <125%)±10%: fault (shut down output) after 30s; (load>125%)±10%: Fault (shut down output) after 30s <125%)±10%:>
Surge Rating 3000VA 6000VA 9000VA 12000VA 15000VA 18000VA
Capacity of Starting Electric Motor 1HP 1HP 2HP 3HP
Output Short Circuit Protection Current-limiting (10s after fault)
Inverter Breaker 10A 30A
Nominal DC Input Voltage 12V/24V 12V/24V 12V/24V/48V 24V/48V 24V/48V 24V/48V
Min. DC Start Voltage 11V/22V/43V
Low Battery Alarm 10.5VDC± 0.3VDC for 12V battery; 21.0VDC±0.6VDC for 24V battery; 42.0VDC±0.6VDC for 48V battery
Low DC Input Shutdown 10.0VDC± 0.3VDC for 12V battery; 20.0VDC±0.6VDC for 24V battery; 40.0VDC±0.6VDC for 48V battery
High DC Input Alarm & Fault 16 VDC±0.3VDC for 12V battery; 32VDC±0.6VDC for 24V battery; 64VDC±0.6VDC for 48V battery
High DC Input Recovery 15.5VDC±0.3VDC for 12V battery; 31.0VDC±0.6VDC for 24V battery; 62.0VDC±0.6VDC for 48V battery
Power Saver Load≤25W
Charge Mode Specifications of Power Inverter with Charger
Nominal Input Voltage 230VAC/120VAC
Input Voltage Range 155-265VAC/96-127VAC
Nominal Output Voltage Same as input voltage
Nominal Charge Current 35A/20A 65A/40A 65A/45A/25A 65A/35A 65A/40A 65A/50A
Charge Current Regulation 25%, 50%, 75%, 100%
Battery Initial Voltage 0-15.7VDC/31.4VDC/62.8VDC (operation with 0V battery available)
Charger Short Circuit Protection Circuit breaker
Over Charge Protection Battery: V≥15.7VDC/31.4VDC/62.8VDC, beeps 0.5s every 1s & fault after 60s
General Specifications
Safety Certification CE, FCC
Operating Temperature Range 0℃ to 40℃
Storage Temperature -15℃ to 60℃
Operation Humidity 5% to 95%
Audible Noise Max. 60dB
Cooling Mode Forced ventilation, variable speed fan
Size 570×315×300mm 755×319×288mm

Features & application

Features
1. The power inverter with charger comes with durable construction for long life under extreme environmental conditions.
2. Low idle current (less than 12 watt) conserves energy.
3. Soft start for starting heavy load.
4. Built-in start control circuits for two and three-wire generator starting system.
5. Simplified control with a snap-on cover that protects settings from being accidentally modified.
6. Optimal thermal performance allows full output power to 50℃ (122°F) without de-rating.
7. High surge capacity makes it possible for handling heavy load and overload reliably.
8. Durable powder coated corrosion resistant steel chassis.
9. New LCD display shows kilowatts (kW) and amps (A) during inverting and charging, respectively. In addition, the power inverter with charger is installed with a robust ON/OFF switch and status indicators.
10. 70-amp automatic three-stage battery charger (bulk, absorption, and float) and battery equalizer with remote temperature sensor for improved performance.
11. Remote control for inverter on/off with 10 meters control cable (optional)
12. Battery priority, new function for solar system (optional)
13. New transformer, high efficiency over 90% (optional)

The RBPSW Power Inverter with Charger can be used on all kinds of home appliances, office equipment, solar power systems, and other equipment that uses single phase power.

The off grid pure sine wave combined inverter charges offers protection against over load, over temperature, over charging and low battery. It also offers protection against reverse connection (optional by hard connector) and blackouts.

Related Products

Other Products
  • RBC Power Inverter with Charger The RBC power inverter with charger perfectly combines the high frequency inverter with battery charger to offer the power from 300W to 5000W. Compared with low frequency inverter, the combined inverter charger has lighter weight and higher efficiency.
  • Modified Sine Wave InverterThe modified sine wave inverter is specially made for your favorite car and can perfectly match the cigarette lighter; it's much better than the original inverter system in the car.
    It offers an external 2.0 USB plug, LED (dual-color) automatically exchange.